Setting up a Netgear wireless router

Setting up a Netgear wireless router The following instructions are … installer CD will prompt you when it is time to add the router hardware to the system. Part 1: Installing the … Begin this process with your computer connected directly to your cable modem or DSL modem. The installer CD will prompt you when it is time to add the router hardware to the system. Part 1: Installing the router hardware 1. Insert the installer CD in the drive. When the Welcome screen appears, click Setup . This launches an Installation Assistant. The first screen displays an overview of the installation process and steps you should take before you install the router.
3. Click Yes . The utility displays estimated times for the download. 4. Click Next to proceed. The next screen gives information about the download and instructs you to click Run whenever you see a security message during the download to allow it to proceed. 5. Click Next to continue. The utility checks for updates, and then displays a message asking you to confirm your setup. The utility assumes that you do not have a router already set up on your network and that the computer is directly connected to the cable modem. 6. If this is your setup, click Yes . The utility displays an overview of the process for adding the router. IMPORTANT: If you are replacing your current router with a Netgear wireless router, you can either click No and follow the additional instructions displayed by the setup utility, or you can disconnect your current router, click Yes , and go to the next step in this procedure. 7. Click Next to proceed. 8. Follow the instructions to turn off the modem and disconnect the power cord, and then click Next . 9. Follow the instructions to disconnect the Ethernet cable from the modem, and then click Next . 10. Connect the supplied Ethernet/CAT5 Cable from the modem to the router’s Internet/Uplink port (the port that is set apart from the other ports on the router, as shown on the screen) and then click Next .
Download Setting up a Netgear wireless router.Pdf
I am bigginer with network