Edge Evolution Programmer Installation Instructions & Manual

ADVERTISEMENT


If you have used another tuner/programmer on your truck, you will need to program your truck back to stock before using the Evolution. Failure to return to stock …

Congratulations on purchasing the Evolution by Edge Products, LLC, the leader in truck performance and power gain technology. The following manual contains information and instructions on the proper use of the Evolution. Please read carefully before proceeding to program your vehicle.

Note: Read the product disclaimer and the Getting Connected section before programming your vehicle.

Note: At the back of this manual, we have included commonly used acronyms. This should help while using the Evolution.

Stock Program

The Evolution automatically makes a backup of your stock program from your PCM before writing a new program onto your PCM. This assures that you will have the stock program if/when you desire to reprogram your vehicle to its original stock program.

It is strongly recommended prior to returning your vehicle to a service center or emissions check that you return your vehicle’s computer to the stock program. In the event that the service center re-flashes your vehicle’s computer (a common practice) and you have NOT returned it to stock, your Evolution programmer will be rendered useless. If this happens, call our technical support at (888) 360-EDGE and they can help you recover your Evolution for a small fee. Follow the steps included in this manual for returning your rogram to stock.

Tow Only Program

This setting is the lowest power setting. It is designed to provide a significant increase in horsepower and torque while still being safe enough to use for towing. While it isn’t necessary, a modified exhaust system will help improve overall performance and help reduce your EGT (exhaust gas temperature) levels.

Race Performance Program

If you plan to tow with this program, it is strongly recommended that you make appropriate modifications to your exhaust system and install an EGT (exhaust gas temperature) gauge to aid in the prevention of potential damage to your engine.

Download Edge Evolution Programmer Installation Instructions & Manual.pdf

Personalize Your Document Now

Leave a Reply