Brake pad & caliper service kit Model 97143 Operating instructiOns Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. distributed exclusively by Harbor Freight t ools®. 3491 Mission Oaks Blvd., Camarillo, CA 93011 visit our website at: http://www.harborfreight.com read this material before using this product. Failure to do so can result in serious injury. save tHis Manual…..

Operating instructiOns read the entire Warning section at the beginning of this manual including all text under subheadings therein before set up or use of this product. This Service Kit will work with most model vehicles. See page 6 for a description of which components will work with your make and model. Read the vehicle owner’s manual to determine which Disc and Thrust Bolt to use. Move the T-handle of the Thrust bolt to one side and slide the plate over the Thrust Bolt, until it rests on the bottom. Apply the Disc to the two pegs on the bottom of the Thrust Bolt (the magnet will hold it in place). Raise and safely secure vehicle. Remove the wheel and brake caliper. Remove the worn brake pads and hard- ware. Service the caliper according to the vehicle manufacturer’s instructions. Reassemble caliper, brake pads, and wheels. Clean, then store the Service Kit indoors out of children’s reach. Warning! Test the brakes thoroughly before use….

Download Brake pad & caliper service kit Model 97143 Operating Instructions.Pdf