BMW E36 Fitting Instructions. Page 5 of 5. 11, Remove the back cover from the headlamp and remove the side light bulb holder. 12, Wiring the power pack into …BMW E36 & BMW E39 Eclipse Lights Installation guide…

Eclipse Lights – BMW E36 Installation guide www.eclipse-lights.com BMW E36 Fitting Instructions Page 2 of 2 With the headlamps removed from the vehicle :. 1, Use a flat blade screwdriver, remove the 4 metal clips holding the lens assembly and back housing together. 2 clips are on the top and 2 clips on the bottom.
2, Unclip the lens assembly from the rear housing. There are 4 clips to release, 2 on each side of the headlamp. 3, Pull the lens assembly apart from the rear housing and place on a clean surface. Ensure that the headlamp lenses are clean and free of any dirt/dust. Clean them it if necessary ! 5, Carefully place the ring into the lens cavity. Ensure the ring is seated flat against the lens. * It may be necessary to bend the wiring on the end of the ring, If necessary please do so very carefully. 6, Use masking tape to hold the rings in position…

Download BMW E36 & BMW E39 Lights Installation guide.Pdf